0
    0

    Your Cart is Empty

    0
    Home / Products / 1000x450 Alume LED Pill Back Lit Mirror

    1000x450 Alume LED Pill Back Lit Mirror

    ALUME100PILBL

    RRP

    Coming Soon

    Make An Enquiry
    Make An Enquiry
    1000x450 Alume LED Pill Back Lit Mirror
    Coming Soon
    Demister function covers the centre portion of the mirror, preventing condensation build up
    Illuminated touch on/off switch conveniently located on the face of the mirror, with dimming function to adjust brightness to suit
    Three lighting settings; Warm (3000k) to create ambience, Cool White (4000k) for everyday use, and Daylight (6000k) to illuminate and for closeups
    Integrated hanging brackets included, so it can be hung vertically or horizontally on your wall
    Edge sealed and IP44 rated to prevent moisture and water damage, suitable for long term use in wet areas and living spaces
    20mm radiused corners for a soft, modern finish
    Vinyl backed, copper free mirror glass for a longer lifespan
    Available in LED front lit or LED back lit styles
    All dimensions are nominal
    Width - 1000mm
    Height - 450mm
    Depth - [confirm]mm
    *ELECTRICAL COMPLIANCE
    IP44 Rated, 220V-240V, 50 Hz
    Electrically Compliant*
    Demister pads are factory fitted
    The NZ Electrical Code of Practice published by Work Safe NZ (NZ Govt) has regulations covering the light fittings that can be installed in bathrooms, these products conform to the IP44 electrical standard requirements. Alume LED mirrors are fitted with SAA approved componentry and comply with all requirements of AS/NZS CISPR 15:2011 – Radio Frequency emissions, AS/NZS 60598.1:2013 – General Requirements for Luminaries, and AS/NZS 60598.2.1:2014+ A1 – Requirements for Fixed Luminaries.
    Residential / Domestic Warranty
    2 years: Mirrors
    Refer to Installation Instructions and the Warranty & Maintenance page for further information.
    Commercial Use Warranty: 2 year
    • PRODUCT FEATURES
      Demister function covers the centre portion of the mirror, preventing condensation build up
      Illuminated touch on/off switch conveniently located on the face of the mirror, with dimming function to adjust brightness to suit
      Three lighting settings; Warm (3000k) to create ambience, Cool White (4000k) for everyday use, and Daylight (6000k) to illuminate and for closeups
      Integrated hanging brackets included, so it can be hung vertically or horizontally on your wall
      Edge sealed and IP44 rated to prevent moisture and water damage, suitable for long term use in wet areas and living spaces
      20mm radiused corners for a soft, modern finish
      Vinyl backed, copper free mirror glass for a longer lifespan
      Available in LED front lit or LED back lit styles
    • DIMENSIONS
      All dimensions are nominal
      Width - 1000mm
      Height - 450mm
      Depth - [confirm]mm
      *ELECTRICAL COMPLIANCE
      IP44 Rated, 220V-240V, 50 Hz
      Electrically Compliant*
      Demister pads are factory fitted
      The NZ Electrical Code of Practice published by Work Safe NZ (NZ Govt) has regulations covering the light fittings that can be installed in bathrooms, these products conform to the IP44 electrical standard requirements. Alume LED mirrors are fitted with SAA approved componentry and comply with all requirements of AS/NZS CISPR 15:2011 – Radio Frequency emissions, AS/NZS 60598.1:2013 – General Requirements for Luminaries, and AS/NZS 60598.2.1:2014+ A1 – Requirements for Fixed Luminaries.
    • DOWNLOADS
      Specification Sheet
    • WARRANTY
      Residential / Domestic Warranty
      2 years: Mirrors
      Refer to Installation Instructions and the Warranty & Maintenance page for further information.
      Commercial Use Warranty: 2 year