600x1200 Alume LED Front Lit Mirror | Athena - Coming September 2026

ALUME120RECFL

RRP

$790

Available September 2026

The Alume LED Mirror is designed to soften the everyday into something a little more considered, wrapping your reflection in a warm, ambient glow that shifts with the moment. Choose a gentle back-lit halo for a relaxed, spa-like evening wind-down, or a crisp front-lit finish for true-to-life clarity when it matters most. Available in round, pill and rectangular silhouettes, and finished with the same three-tone dimmable lighting as the rest of the Alume family, it's an easy way to bring calm, considered light into any bathroom.

Demister function covers the centre portion of the mirror, preventing condensation build up
Illuminated touch on/off switch conveniently located on the face of the mirror, with dimming function to adjust brightness to suit
Three lighting settings; Warm (3000k) to create ambience, Cool White (4000k) for everyday use, and Daylight (6000k) to illuminate and for closeups
Integrated hanging brackets included, so it can be hung vertically or horizontally on your wall
Edge sealed and IP44 rated to prevent moisture and water damage, suitable for long term use in wet areas and living spaces
20mm radiused corners for a soft, modern finish
Vinyl backed, copper free mirror glass for a longer lifespan
Available in LED front lit or LED back lit styles

All dimensions are nominal
Width - 1200mm
Height - 600mm
Depth - 30mm
*ELECTRICAL COMPLIANCE
IP44 Rated, 220V-240V, 50 Hz
Electrically Compliant*
Demister pads are factory fitted
The NZ Electrical Code of Practice published by Work Safe NZ (NZ Govt) has regulations covering the light fittings that can be installed in bathrooms, these products conform to the IP44 electrical standard requirements. Alume LED mirrors are fitted with SAA approved componentry and comply with all requirements of AS/NZS CISPR 15:2011 – Radio Frequency emissions, AS/NZS 60598.1:2013 – General Requirements for Luminaries, and AS/NZS 60598.2.1:2014+ A1 – Requirements for Fixed Luminaries.

Specification Sheet

Residential / Domestic Warranty
2 years: Mirrors
Refer to Installation Instructions and the Warranty & Maintenance page for further information.
Commercial Use Warranty: 1 year

PRODUCT FEATURES

Demister function covers the centre portion of the mirror, preventing condensation build up
Illuminated touch on/off switch conveniently located on the face of the mirror, with dimming function to adjust brightness to suit
Three lighting settings; Warm (3000k) to create ambience, Cool White (4000k) for everyday use, and Daylight (6000k) to illuminate and for closeups
Integrated hanging brackets included, so it can be hung vertically or horizontally on your wall
Edge sealed and IP44 rated to prevent moisture and water damage, suitable for long term use in wet areas and living spaces
20mm radiused corners for a soft, modern finish
Vinyl backed, copper free mirror glass for a longer lifespan
Available in LED front lit or LED back lit styles
DIMENSIONS

All dimensions are nominal
Width - 1200mm
Height - 600mm
Depth - 30mm
*ELECTRICAL COMPLIANCE
IP44 Rated, 220V-240V, 50 Hz
Electrically Compliant*
Demister pads are factory fitted
The NZ Electrical Code of Practice published by Work Safe NZ (NZ Govt) has regulations covering the light fittings that can be installed in bathrooms, these products conform to the IP44 electrical standard requirements. Alume LED mirrors are fitted with SAA approved componentry and comply with all requirements of AS/NZS CISPR 15:2011 – Radio Frequency emissions, AS/NZS 60598.1:2013 – General Requirements for Luminaries, and AS/NZS 60598.2.1:2014+ A1 – Requirements for Fixed Luminaries.
DOWNLOADS

Specification Sheet
WARRANTY

Residential / Domestic Warranty
2 years: Mirrors
Refer to Installation Instructions and the Warranty & Maintenance page for further information.
Commercial Use Warranty: 1 year

600x1200 Alume LED Front Lit Mirror | Athena - Coming September 2026

Recently Viewed Items

Recently Viewed Items